Chelsea Fire Department Posts Fire Prevention Tips

The Chelsea Fire Department wants you to know that this week is National Fire Prevention, and this year’s theme is “Learn the Sounds of Fire Safety.”  The week long event will culminate with the annual Open House this Saturday, October 9 from 11 am to 2 pm at Central Fire Station.

 This year’s theme will draw attention to the different sounds that modern smoke and carbon monoxide (CO) alarms make and what actions we should take when we hear them.

“Every home is required to have working smoke alarms and most are also required to have CO alarms,” said State Fire Marshal Peter J. Ostroskey. “When these alarms beep or chirp, it’s time to take action. Make sure everyone in your home recognizes these sounds, understands what they mean, and knows how to respond.”

Hear a beep? Get on your feet!

 A continuous series of three or four loud beeps means smoke, fire, or carbon monoxide. Get out, stay out, and call 9-1-1.

Hear a chirp? Make a change!

 A chirping alarm every 30 or 60 seconds means the alarm’s batteries – or the entire alarm – must be replaced. If an alarm using replaceable alkaline batteries doesn’t respond or continues chirping with fresh batteries, replace it right away. 

 “If your smoke or CO alarms take replaceable batteries, we recommend changing the batteries twice a year, usually at the beginning and end of Daylight Saving Time,” said Ostroskey. “Sealed alarms with non-replaceable, long-life batteries should be replaced after 10 years.”

For more than a decade, all smoke and carbon monoxide alarms have had the manufacturing date printed on the back. If the date on your smoke alarm is more than 10 years old, if the date on your CO alarm is more than five to seven years old, or if there’s no date at all, it’s time to replace the alarm.

Options for People Who are Deaf or Hard of Hearing

People who are deaf or hard of hearing may not be able to hear typical alarms to let them know there is danger – but specialized alarms and devices are available to ensure everyone’s safety in case of fire or high CO levels. These devices may have strobe lights to alert them when they’re awake, or a pillow or bed shaker activated by the sound of a standard alarm for when they’re asleep. As with any alarm, they can also signal when the battery is low.

Maintenance

Follow your alarm manufacturer’s cleaning instructions to keep them working properly: these instructions are included with the packaging and can be found online. Test alarms once a month and replace them if they fail to respond.

Working Smoke and CO Alarms Save Lives

“Working smoke alarms can cut the risk of dying in a fire in half, and working CO alarms can alert you to a deadly gas you can’t see, taste, or smell. The noises these alarms make can be the difference between life and death – so make sure you and your loved ones learn the sounds of safety.”

 For more information on smoke and CO alarms, visit the DFS webpage.  For more Fire Prevention Week tips, visit www.FPW.org.

Leave a Reply

Your email address will not be published. Required fields are marked *